Products
JMC Customized 23m 28m 32m 36m Straight Arm Aerial Lift Truck High Altitude Operation Aerial Work Truck with Platform
product VIDEOzhuozzhihao
Detailedzzhao
Vehicle-mounted Aerial work vehicles-5041JGKJ6
Aerial work vehicles are mechanical equipment specially used for aerial work, which can be lifted up and down for work. They are usually used for installation, maintenance and climbing work in industries such as advertising, photography, electricity, street lights, gardening, transportation, docks, airports, etc. The main types include folding arm type, telescopic arm type, mixed arm type and self-propelled type. Telescopic arm aerial work vehicles are suitable for construction, communications, electricity and other fields, while lifting aerial work vehicles are widely used in indoor and outdoor cleaning, maintenance, installation and other industries.
The design features of aerial work vehicles include a new type of fully hydraulic self-propelled special chassis, which allows the equipment to remain stable even on uneven roads and is suitable for loaded driving and operation. It is suitable for various complex terrains and high-altitude working environments.
● Control system：Equipped with an intelligent controller and LCD display, it can achieveamplitude control, automatic throttle, and display operation informationsuch as load,amplitude, and height
● Operation：The lower part is equipped with a five-lever hydraulic valve group, withhydraulic control for horizontal and vertical leg operation. The upper partis equipped with load-sensitive proportional valves for full manual oper-ation, and a bus-type wireless remote control for combined arm move-ments,including amplitude adjustment, extension, and rotation
Technical Parameters zzhao
Dimension parameters(D"W'H mm)：5995*2080*2760
Quality parameters(kg)：4495
Number of passengers(including the driver)：2
Platfom rated load(kg)：200
Maximum working height(m)：21/23/28
Maximum working outreach(m）：12（200kg），15.2（100kg）
Outrigger transverse distance(mm)：F4350/R4020
Longitudinal leg span(mm)：3970
Front overhang/Rear overhang(mm)：1075/1815
Front extension/Rear extension(mm)：0/305
Approach angle/Departure angle(°)：19/13
Maximum vehicle speed(km/h)：100
Maximum cimbing gradient(%)：30
Chassis: It uses a JMC JX1041TCD26 single-row chassis
Engine: It uses a JMC JX4D30B6H engine with a rated power of85 kw
Cab:It has a JMC National Vl new single-row cab and
canaccommodate 2 people, including the driver
Work platform configuration: Work platform dimensions: 1380x700x1100mm
Boom type: 4 section synchronized telescopic boom with a polygonalshape
Slewing device: 360* continuous rotation
Frame: High-strength box-type chassis
Outriggers: Front V and Rear H high-strength steel box-type
outriggers.Internal-type outrigger cylinders
Matters needing attention：
1.When using an aerial work vehicle, strict safety operating regulations must be followed to ensure the correct use and maintenance of the equipment. Operators need to undergo professional training and understand the operation and maintenance methods of the equipment to ensure safety during aerial work.
2.Pre-operation inspection: Before using the aerial work vehicle, a comprehensive inspection must be carried out, including the vehicle's condition, hydraulic system, lifting mechanism, electrical system, etc., to ensure that all parts are functioning properly.
3.During use, the load limit must be strictly observed and overloading is not allowed. Overloading may cause the vehicle to lose control and increase the risk of accidents.
4.Environmental adaptability: When using aerial work vehicles in different environments, you need to pay attention to factors such as the ground's bearing capacity, slope, wind direction, etc. to ensure the stability and safety of the vehicle.
Multi angle displayzzhao
-
Flexible Operation
Boom amplitude with intelligent torque limitingFlexibly control the working range based on the actual platform load.The smaller the load, the larger the working range, and the larger theload, the smaller the working range. The arm length can be intelligentlycalculated based on the load and outrigger length, significantly improv-ing operational performance while ensuring safety.
Intelligent Connectivityzzhao
-
Intelligent Connectivity
Proportional valve group, remote control operationAll the operations on the vehicle can be remotely controlled from adistance using a wireless remote, and the boom can perform variouscomplex actions (boom amplitude change, boom extension, turntableand working platform rotation) 
Efficient Operationzzhao
-
Efficient Operation
Intelligent Human-Machine Interaction System, easily obtain4equipment status (location, operational information, and anomalyalerts,elc.),Smart connectivty, automalic display of error codeseffective for operational management.
Reliable Performancezzhao
-
Reliable Performance
"Battery voltage warning function,ensuring battery life.Proportional valve control for precise and flexible lifting, greatlyenhancing smooth operation.Electrophoresis + powder coating process, vuinerable electricaparts with lP67 waterproof protection, rust, and corrosionresistance, durable and worry-free 
Low Maintenance Costszzhao
-
Low Maintenance Costs
Self-lubricating composite fiber bushings, maintenance-free.Both sides feature integral swiveling trays, making maintenanceand repair convenient.Using a common and modular design within the same series,achieving an 80% or higher commonality rate for forklifts andshared components among similar equipment.
Model selectionZHUOZZHIHAO
DIFFERENT MACHINE RACKS HAVE DIFFERENT PURPOSES
1823RED(28M)
1823RED(32M)
5040TBAJ6(32M)
5040TBAJ6(36M)
Buyer NoticeZHUOZZHIHAO
1.All products in this shop are genuine,please feel free to purchase
2.All products in this shop are sold at actual prices,please do not renegotiate
3.The lighting during shooting angle color deviation of the monitor,and some errors in certain aspects,causing dis-crepancies between the physical object and the photo,Please refer to the actual product for the color